Carrier-band to Fiber Optic Repeaters
 |
The Carrier-band Repeaters are used to extend the network up to 50km. Repeaters extend the Carrier-band network with fiber optic cable which also has the advantage of less susceptibility to noise and near-lightning strikes.
Three models of Fiber Optic Repeaters are available:
- The CBR-2 is intended for multi-mode applications where the fiber optic segment is less than 2 km in length or a passive star coupler is used with few ports and with short spurs.
- The CBR-3 is intended for multi-mode applications where the fiber optic segment is up to 8 km in length.
- The CBR-7 is a single mode fiber optic repeater intended for applications where the fiber optic segment is up to 50km in length.
The repeaters are available with either AC or DC power. |
The DXF links in the Drawings column below are mechanical drawings of the product that may be included in your AutoCAD® or equivalent CAD drawings. The remaining table entries are PDF files that may be viewed with
Adobe’s Acrobat Reader.
*** CBR-3 and CBR-7 Models have been Discontinued ***
Part
Number |
Description |
Data Sheet |
Installation Instructions |
Drawing
(DXF) |
Certification |
Applications |
| CBR-2AC |
Repeater, 850 nm, AC power |
PS-051 |
500-168
500-169 |
N/A |
CC-009
CC-011
|
Class I, Division1, Groups A, B, C and D
General Purpose
Class I, Zone 0, Groups IIC, IIB, IIA |
| CBR-2DC |
Repeater, 850 nm, DC power |
500-169 |
| CBR-3AC |
Repeater, 1300 nm, AC power |
500-168
500-169 |
| CBR-3DC |
Repeater, 1300 nm, DC power |
500-169 |
| CBR-7AC |
Repeater, 1300 nm, AC power |
PS-029 |
501-281 |
CC-013 |
General Purpose |
| CBR-7DC |
Repeater, 1300 nm, DC power |
501-281 |
| CBR-A0050A |
Rack Mount Kit, Single Unit |
N/A |
500-146 |
N/A |
General Purpose |
| CBR-A0060A |
Rack Mount Kit, Dual Unit |
|
