Fieldbus Power Conditioner
The FCS-BPC series Power Conditioner is used to connect a conventional power source to a Fieldbus segment. Power is applied to one or both sets of power terminals at ports 1 and/or 2; they are connected in parallel internally. The typical input voltage range is 15 to 30 VDC. An impedance control circuit in the Power Conditioner prevents the conventional power source from absorbing the Fieldbus signaling current or otherwise interfering with the operation of the Fieldbus.
FCS-BPC series Power Conditioners do not provide isolation from the input power. See the data sheet for special precautions.
For high reliability systems, we recommend our newer Isolated Fieldbus Power Supplies.
The DXF links in the Drawings column below are mechanical drawings of the product that may be included in your AutoCAD® or equivalent CAD drawings. The remaining table entries are PDF files that may be viewed with
Adobe’s Acrobat Reader.
| Part Number |
Description |
Data Sheet |
Installation Instructions |
Drawing (DXF) |
Certification |
Applications |
| FCS-BPC-PL |
Fieldbus Balanced Power Conditioner, Non-Isolated, No Terminator, Pluggable Screw Terminals |
PS-009 |
501-418 |
FCS-BPC-PL.DXF |
CC-026 |
General Purpose
Class I, Div 2, Groups ABCD
Ex nA IIC T4
AEx nA IIC T4 |
| FCS-BPC-ST |
Fieldbus Balanced Power Conditioner, Non-Isolated, No Terminator, Fixed Screw Terminals |
FCS-BPC-ST.DXF |
| FCS-BPC-CC |
Fieldbus Balanced Power Conditioner, Non-Isolated, No Terminator, Cage Clamp Terminals |
FCS-BPC-CC.DXF |
| FCS-BPCT-PL |
Fieldbus Balanced Power Conditioner, Non-Isolated, One Terminator, Pluggable Screw Terminals |
FCS-BPCT-PL.DXF |
| FCS-BPCT-ST |
Fieldbus Balanced Power Conditioner, Non-Isolated, One Terminator, Fixed Screw Terminals |
FCS-BPCT-ST.DXF |
| FCS-BPCT-CC |
Fieldbus Balanced Power Conditioner, Non-Isolated, One Terminator, Cage Clamp Terminals |
FCS-BPCT-CC.DXF |
| FCS-BPCT2-PL |
Fieldbus Balanced Power Conditioner, Non-Isolated, Two Terminators, Pluggable Screw Terminals |
FCS-BPCT2-PL.DXF |
| FCS-BPCT2-ST |
Fieldbus Balanced Power Conditioner, Non-Isolated, Two Terminators, Fixed Screw Terminals |
FCS-BPCT2-ST.DXF |
| FCS-BPCT2-CC |
Fieldbus Balanced Power Conditioner, Non-Isolated, Two Terminators, Cage Clamp Terminals |
FCS-BPCT2-CC.DXF |
|
