Fieldbus Wiring Validator FBT-5
 |
Fieldbus wiring can be tested using the FBT-5 Wiring Validator. It puts a DC voltage and Fieldbus signals on the wire pair. A Fieldbus Monitor, FBT-3 or FBT-6, is used to test the voltage, signal levels and noise on the wiring. These tests can be performed on existing instrumentation wiring, newly installed Fieldbus cable or a Fieldbus wiring system with wiring blocks and terminators already installed. |
The DXF links in the Drawings column below are mechanical drawings of the product that may be included in your AutoCAD® or equivalent CAD drawings. The remaining table entries are PDF files that may be viewed with
Adobe’s Acrobat Reader.
| Part Number |
Description |
Data Sheet |
Installation Instructions |
Drawing (DXF) |
Certification |
Applications |
| FBT-5 |
Fieldbus Wiring Validator |
PS-014 |
500-052 |
N/A |
|
General Purpose |
|
